Product Center
Air Filter Products Manufacturers – SK-1022AB – Qiangsheng
Air Filter Products Manufacturers – SK-1022AB – Qiangsheng Detail:
What are the advantages of an air filter?
The engine needs to suck in a lot of air during the working process. If the air is not filtered, the dust suspended in the air will be sucked into the cylinder, which will accelerate the wear of the piston group and the cylinder. Larger particles entering between the piston and the cylinder can cause serious “pulling the cylinder”, which is especially serious in dry and sandy working environments. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand in the air, ensuring that sufficient and clean air enters the cylinder
According to the filtration principle, air filters can be divided into filter type, centrifugal type, oil bath type and composite type.
During maintenance, the paper filter element must not be cleaned in oil, otherwise the paper filter element will fail, and it is easy to cause a speeding accident. During maintenance, only the vibration method, the soft brush removal method (to brush along the wrinkle) or the compressed air blowback method can only be used to remove the dust and dirt attached to the surface of the paper filter element. For the coarse filter part, the dust in the dust collecting part, the blades and the cyclone pipe should be removed in time. Even if it can be carefully maintained every time, the paper filter element cannot fully restore its original performance, and its air intake resistance will increase. Therefore, generally, when the paper filter element needs to be maintained for the fourth time, it should be replaced with a new filter element. If the paper filter element is cracked, perforated, or the filter paper and end cap are degummed, they should be replaced immediately.
Installation and use of air filter
Air filter element is a type of filter, also known as air filter cartridge, air filter, style, etc. Mainly used for air filtration in engineering locomotives, automobiles, agricultural locomotives, laboratories, sterile operating rooms and various precision operating rooms.
The air filter engine needs to suck in a lot of air during the working process. If the air is not filtered, the dust suspended in the air is sucked into the cylinder, which will accelerate the wear of the piston group and the cylinder. Larger particles entering between the piston and the cylinder can cause serious “pulling the cylinder”, which is especially serious in dry and sandy working environments.
The air filter is installed in front of the carburetor or the intake pipe, and plays the role of filtering out dust and sand in the air, so as to ensure that sufficient and clean air enters the cylinder.
Air filter installation and use
1. When the air filter element is installed, whether it is connected by flange, rubber pipe or direct connection between the air filter and the engine intake pipe, it needs to be tight and reliable to prevent air leakage. Rubber gaskets must be installed on both ends of the filter element; Do not overtighten the wing nut of the filter housing to avoid crushing the paper filter element.
2. During the maintenance of the air filter element, the paper filter element must not be cleaned in oil, otherwise the paper filter element will fail, and it is easy to cause a speeding accident. During maintenance, only use the vibration method, the soft brushing method or the compressed air blowback method to remove the dust and dirt attached to the surface of the paper filter element.
3. When the air filter element is in use, it is necessary to strictly prevent the paper core air filter from being wet by rain, because once the paper core absorbs a lot of water, it will greatly increase the air intake resistance and shorten the mission. In addition, the paper core air filter must not come into contact with oil and fire.
4. Some vehicle engines are equipped with a cyclone air filter. The plastic cover at the end of the paper filter element is a shroud. The blades on the cover make the air rotate, and 80% of the dust is separated under the action of centrifugal force and collected in the dust collector. Among them, the dust reaching the paper filter element is 20% of the inhaled dust, and the total filtration efficiency is about 99.7%. Therefore, when maintaining the cyclone air filter, be careful not to miss the plastic shroud on the filter element.
Product description
A:
| QS NO. | SK-1022A |
| CROSS REFERENCE | 1142150670 |
| CROSS REFERENCE | CAT7Y0404 |
| Donaldson | P181080 |
| Fleetguard | AF1768M |
| VEHICLE | EX220/EX270 JackJS200LC/JS240LC |
| LARGEST OD | 225(MM) |
| OVERALL HEIGHT | 340/ 328(MM) |
| INTERNAL DIAMETER | 147 |
| Mounting hole | 23 |
B:
| QS NO. | SK-1022B |
| CROSS REFERENCE | 1142151110 |
| CROSS REFERENCE | CAT7Y0403 |
| DONALDSON | P127315 |
| FLEETGUARD | AF1767 |
| LARGEST OD | 145(MM) |
| OVERALL HEIGHT | 316/ 306(MM) |
| INTERNAL DIAMETER | 116 |
| MOUNTING HOLE | 17 |
Our Workshop
Packing & Delivery
Our Exhibition
Our service
Product detail pictures:
Related Product Guide:
Sticking towards the theory of "Super Good quality, Satisfactory service" ,We are striving to become a superb business enterprise partner of you for Air Filter Products Manufacturers – SK-1022AB – Qiangsheng , The product will supply to all over the world, such as: Iraq, Miami, Poland, Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.
By Giselle from Rome - 2017.06.19 13:51
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Barbara from Hungary - 2018.06.21 17:11
