Product Center
Hydraulic Filter For Excavator Factory – SY-2017 excavator hydraulic oil filter for KOMATSU 203-60-21141 – Qiangsheng
Hydraulic Filter For Excavator Factory – SY-2017 excavator hydraulic oil filter for KOMATSU 203-60-21141 – Qiangsheng Detail:
What Does A Hydraulic Filter Do?
Hydraulic oil is an important part of every hydraulic system. In a hydraulic system, the system will not work without the appropriate hydraulic fluid volume. In addition, any changes in fluid level, fluid properties, etc. It would destroy the entire system we’re using. If hydraulic fluid is so important, what happens if it gets contaminated?
The risk of hydraulic oil contamination increases with the use of hydraulic systems. Leakage, rust, inflation, cavitation, seal damage… Contaminate the hydraulic fluid. The problems caused by contaminated hydraulic fluids can be classified as degradation, transient or catastrophic failure. Degradation is a type of failure which affects the normal operation of hydraulic system by slowing down the operation speed of hydraulic system. Transient faults are intermittent faults that occur at irregular intervals. Finally, the catastrophic failure was the end of the hydraulic system. Contaminated hydraulic fluids can become a serious problem. So, how to protect the hydraulic system from contamination?
Hydraulic fluid filtration is the only solution to eliminate fluid contaminants in use. Particle filtration using different types of filters will remove pollutant particles such as metals, fibers, silica, elastomers and rust from hydraulic fluids.
How to clean Hydraulic filter?
Many people think that the hydraulic oil filter element is difficult to clean, cleaning the hydraulic oil filter element will greatly improve its service life. In fact, there is a way to clean the hydraulic oil filter. The original hydraulic oil filter element is generally made of stainless steel wire mesh. To clean such hydraulic oil filter element, first soak the filter element in kerosene for a period of time. It’s easy to blow off. It’s stained. At the same time, it should be noted that if the original hydraulic oil filter element is not too dirty, it is best to avoid this method, and it is best to replace the new hydraulic oil filter element.
Product description
| QS NO. | SY-2017 |
| CROSS REFERENCE | 203-60-21141 |
| ENGINE | PC60-6 |
| LARGEST OD | 95(MM) |
| OVERALL HEIGHT | 159(MM) |
| INTRNAL DIAMETER | 50 |
Our Workshop
Packing & Delivery
Our Exhibition
Our service
Product detail pictures:
Related Product Guide:
"Control the standard by the details, show the power by quality". Our firm has strived to establish a extremely efficient and stable employees crew and explored an effective excellent command method for Hydraulic Filter For Excavator Factory – SY-2017 excavator hydraulic oil filter for KOMATSU 203-60-21141 – Qiangsheng , The product will supply to all over the world, such as: Saudi Arabia, Algeria, Curacao, We are in continuous service to our growing local and international clients. We aim to be worldwide leader in this industry and with this mind; it is our great pleasure to serve and bringing the highest satisfaction rates among the growing market.
By Mary from The Swiss - 2017.06.19 13:51
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Fiona from French - 2017.02.14 13:19
