Product Center
OEM High Quality Harvester Hydraulic Oil Filter Factories – SY-2008 hydraulic oil filter replace for 07063-01100 175-60-27380 07063-51100 – Qiangsheng
OEM High Quality Harvester Hydraulic Oil Filter Factories – SY-2008 hydraulic oil filter replace for 07063-01100 175-60-27380 07063-51100 – Qiangsheng Detail:
What Does A Hydraulic Filter Do?
Hydraulic fluid is the most important part of every hydraulic system. In hydraulics, no system works without a proper volume of hydraulic fluid. Also, any variation in fluid level, fluid properties, etc.. can damage the entire system we are using. If the hydraulic fluid has this much importance, then what will happen if it gets contaminated?
The risk of hydraulic fluid contamination increases based on the increased usage of the hydraulic system. Leakages, rust, aeration, cavitation, damaged seals, etc… make the hydraulic fluid contaminated. Such contaminated hydraulic fluids created problems are classified into degradation, transient, and catastrophic failures. Degradation is a failure classification that affects the normal working of the hydraulic system by slowing down the operations. Transient is an intermittent failure that occurs at irregular intervals. Finally, catastrophic failure is the complete end of your hydraulic system. The contaminated hydraulic fluid problems can become severe. Then, how do we protect the hydraulic system from contaminants?
Hydraulic fluid filtration is the only solution to eliminate contaminants from fluid in use. Particle filtration using different types of filters will remove the contaminant particles like metals, fibers, silica, elastomers and rust from the hydraulic fluid.
How to clean Hydraulic filter?
Many people think that hydraulic oil filter elements are difficult to clean without cleaning, which will greatly reduce the service life of hydraulic oil filter elements. In fact, there are ways to clean the hydraulic oil filter element. Generally, the original hydraulic oil filter element is made of stainless steel wire mesh. To clean such a hydraulic oil filter element, you need to soak the filter element in kerosene for a period of time. It can be easily removed by blowing it out with wind. It’s stained. However, it should be noted that this method cannot be used if it is not for the original hydraulic oil filter element that is too dirty, and it is better to replace it with a new hydraulic oil filter element.
Product description
| QS NO. | SY-2008 |
| CROSS REFERENCE | 07063-01100 175-60-27380 07063-51100 |
| DONALDSON | P557380 |
| FLEETGUARD | HF6101 HF28977 |
| ENGINE | WA300-1 PC100-3/120-6/130-6/150-6 |
| LARGEST OD | 130(MM) |
| OVERALL HEIGHT | 292(MM) |
| INTRNAL DIAMETER | 86 |
Our Workshop
Packing & Delivery
Our Exhibition
Our service
Product detail pictures:
Related Product Guide:
Our enterprise since its inception, constantly regards product good quality as organization life, constantly improve production technology, strengthen merchandise high quality and continuously strengthen enterprise total good quality administration, in strict accordance with all the national standard ISO 9001:2000 for OEM High Quality Harvester Hydraulic Oil Filter Factories – SY-2008 hydraulic oil filter replace for 07063-01100 175-60-27380 07063-51100 – Qiangsheng , The product will supply to all over the world, such as: azerbaijan, Cambodia, European, In order to meet our market demands, we have paied more attention to the quality of our products and services. Now we can meet customers' special requirements for special designs. We persistently develop our enterprise spirit "quality lives the enterprise, credit assures cooperation and keep the motto in our minds: customers first.
By Teresa from Egypt - 2017.04.08 14:55
The company account manager has a wealth of industry knowledge and experience, he could provide appropriate program according our needs and speak English fluently.
By Madge from Montreal - 2017.12.19 11:10
