Product Center

SK-1005AB Excavator air filter element for KOMATSU 600-185-5110 600-185-5100 600-185-5120 CATERPILLAR 6I2503 6I2504 AF25129M AF25130M

Short Description:

QS NO.: SK-1005A

OEM NO. : KOMATSU 600-185-5110 KOMATSU 600-185-5100 CATERPILLAR 6I2503 JOHN DEERE T191321 JOHN DEERE F435741

CROSS  REFERENCE: P532503 P812362 AF25129M C281045 C281045/2 RS3506

APPLICATION:

KOMATSU (PC200-8M0/210/220/240、PC300-7、PC350-7、PC360-7)
HITACHI (ZX200-5G、ZX210-5G)
KOBELCO (SK250-8、SK260-8、SK330-8、SK350-8、SK380D)
CAT (324D、325C、325D、326DL、328D、329D、326D2、329D2、330B、330D2L)

OUTER DIAMETER: 280 (MM)

INNER DIAMETER: 149 (MM)

OVERALL HEIGHT: 408/420 (MM)

 

QS NO.: SK-1005B

OEM NO. :KOMATSU 600-185-5120 CATERPILLAR 6I2504 JOHN DEERE AT323638 JOHN DEERE F435742

CROSS  REFERENCE: AF25130M CF15136 P532504 RS3507

APPLICATION: 

KOMATSU (PC200-8M0/210/220/240、PC300-7、PC350-7、PC360-7)
HITACHI (ZX200-5G、ZX210-5G)
KOBELCO (SK250-8、SK260-8、SK330-8、SK350-8、SK380D)
CAT (324D、325C、325D、326DL、328D、329D、326D2、329D2、330B、330D2L)

OUTER DIAMETER: 149/144 (MM)

INNER DIAMETER: 109 (MM)

OVERALL HEIGHT: 393/398 (MM)


Product Detail

Product Tags

What are the specific functions and maintenance points of truck air filters and construction machinery filters?

What are the specific functions and maintenance points of truck air filters and construction machinery filters?

 

The filter element of construction machinery is the most important part of construction machinery. The quality of the filter element affects the performance of the air filter of the truck. The editor has collected the problems to be paid attention to in the daily use of the mechanical filter element, as well as some maintenance knowledge! Filter elements are important construction machinery parts for construction machinery, such as oil filter elements, fuel filter elements, air filter elements, and hydraulic filter elements. Do you know their specific functions and maintenance points for these construction machinery filter elements?

 

1. Under what circumstances do you need to replace the oil filter and truck air filter?

 

The fuel filter is to remove iron oxide, dust and other magazines in the fuel, avoid the blockage of the fuel system, reduce mechanical wear, and ensure the stable operation of the engine. Under normal circumstances, the replacement cycle of the engine fuel filter element is 250 hours for the first operation, and every 500 hours after that. The replacement time should be flexibly controlled according to the different fuel quality grades. When the filter element pressure gauge alarms or indicates that the pressure is abnormal, it is necessary to check whether the filter is abnormal. If there is, it is necessary to change it. When there is leakage or rupture and deformation on the surface of the filter element, it is necessary to check whether the filter is abnormal, and if so, it must be replaced.

 

2. Is the filtration method of the oil filter element in the construction machinery filter element the better?

 

For an engine or equipment, an appropriate filter element should achieve a balance between filtration efficiency and dust holding capacity. Using a filter element with a high filtration precision may shorten the service life of the filter element due to the low ash capacity of the filter element. Large-scale hoisting machinery rental increases the risk of premature blockage of the oil filter element.

 

3. What is the difference between inferior oil and fuel filter, pure oil and truck air filter?

 

The pure steam turbine lubricating oil filter element can effectively protect the equipment and prolong the service life of other equipment. The inferior steam turbine lubricating oil filter element cannot protect the equipment well, prolong the service life of the equipment, and even worsen the use condition of the equipment.

 

4. What benefits can the use of high-quality oil and fuel filter bring to the machine?

 

PAWELSON® said that the use of high-quality steam turbine lubricating oil filter elements can effectively extend the life of equipment, reduce maintenance costs, and save money for users.

Product description

SK-1005AB Excavator air filter element for KOMATSU 600-185-5110 600-185-5100 600-185-5120 CATERPILLAR 6I2503 6I2504 AF25129M AF25130M

A:

QS NO. SK-1005A
OEM NO. KOMATSU 600-185-5110 KOMATSU 600-185-5100 CATERPILLAR 6I2503 JOHN DEERE T191321 JOHN DEERE F435741
CROSS  REFERENCE P532503 P812362 AF25129M C281045 C281045/2 RS3506
APPLICATION KOMATSU (PC200-8M0/210/220/240、PC300-7、PC350-7、PC360-7)
HITACHI (ZX200-5G、ZX210-5G)
KOBELCO (SK250-8、SK260-8、SK330-8、SK350-8、SK380D)
CAT (324D、325C、325D、326DL、328D、329D、326D2、329D2、330B、330D2L)
OUTER DIAMETER 280 (MM)
INNER DIAMETER 149 (MM)
OVERALL HEIGHT 408/420 (MM)

 

B:

QS NO. SK-1005B
OEM NO. KOMATSU 600-185-5120 CATERPILLAR 6I2504 JOHN DEERE AT323638 JOHN DEERE F435742
CROSS  REFERENCE AF25130M CF15136 P532504 RS3507
APPLICATION KOMATSU (PC200-8M0/210/220/240、PC300-7、PC350-7、PC360-7)
HITACHI (ZX200-5G、ZX210-5G)
KOBELCO (SK250-8、SK260-8、SK330-8、SK350-8、SK380D)
CAT (324D、325C、325D、326DL、328D、329D、326D2、329D2、330B、330D2L)
OUTER DIAMETER 149/144 (MM)
INNER DIAMETER 109 (MM)
OVERALL HEIGHT 393/398 (MM)

 

Our Workshop

workshop
workshop

Packing & Delivery

Packing
Packing

Our Exhibition

workshop

Our service

workshop

  • Previous:
  • Next:

  • Write your message here and send it to us