China SY-2024 hydraulic filter for SK60 SK75-8 SK200-5/6/7/8 SK200-6 SK230-6 Manufacture and Factory

SY-2024 hydraulic filter for SK60 SK75-8 SK200-5/6/7/8 SK200-6 SK230-6

Short Description:

QS NO.: SY-2024

ENGINE: SK60 SK75-8 SK200-5/6/7/8SK200-6 SK230-6

LARGEST OD: 42.5(MM)

OVERALL HEIGHT: 44(MM)

INTRNAL DIAMETER: 22(MM)

WhatsApp Us Inquire Now

Product Detail

Product Tags

What Is Hydraulic Filter

The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system, to ensure the cleanliness of the hydraulic system, thereby reducing the pollution caused by normal and abrasion, and to filter new fluids or pollution in the components introduced into the system Things.

Clean hydraulic oil can reduce the accumulation of contaminants, reduce maintenance costs and extend the service life of system components. In-line hydraulic filters can be installed in all typical hydraulic systems, such as those in industrial, mobile and agricultural environments. Offline hydraulic filtration is used to filter the hydraulic fluid in the hydraulic system when adding new fluid, filling fluid, or flushing the hydraulic system before adding new fluid.

Learn More About Hydraulic Filter Element

1.WHAT IS HYDRAULIC FILTRATION AND WHY DO YOU NEED IT?

Hydraulic filters protect your hydraulic system components from damage due to contamination of oils or other hydraulic fluid in use caused by particles. Every minute, approximately one million particles larger than 1 micron (0.001 mm or 1 μm) enter a hydraulic system. These particles can cause damage to hydraulic system components because hydraulic oil is easily contaminated. Thus maintaining a good hydraulic filtration system will increase hydraulic component lifetime

2.EVERY MINUTE ONE MILLION PARTICLES THAT ARE LARGER THAN 1 MICRON (0.001 MM) CAN ENTER A HYDRAULIC SYSTEM.

The wear of hydraulic system components is dependent on this contamination, and the existence of metal parts in hydraulic system oil (iron and copper are particularly powerful catalysts) accelerates its degradation. A hydraulic filter helps to remove these particles and clean the oil on a continuous basis. The performance for every hydraulic filter is measured by its contamination removal efficiency, i.e. high dirt-holding capacities.

3.Hydraulic filters are designed to remove particulate contaminants from hydraulic fluid. Our filters are built with the highest quality and reliability in mind so you know your equipment is safe and can continue to run smoothly.

Hydraulic Filters can be used in a variety of industries including, but not limited to: power generation, defense, oil / gas, marine and other motorsports, transportation and transportation, rail, mining, agriculture and agriculture, pulp and paper, steelmaking and manufacturing, entertainment and various other industries.

How to clean Hydraulic filter?

Many people think that hydraulic oil filter elements are difficult to clean without cleaning, which will greatly reduce the service life of hydraulic oil filter elements. In fact, there are ways to clean the hydraulic oil filter element. Generally, the original hydraulic oil filter element is made of stainless steel wire mesh. To clean such a hydraulic oil filter element, you need to soak the filter element in kerosene for a period of time. It can be easily removed by blowing it out with wind. It’s stained. However, it should be noted that this method cannot be used if it is not for the original hydraulic oil filter element that is too dirty, and it is better to replace it with a new hydraulic oil filter element.