Product Center

SY-2005 high efficiency hydraulic oil filter for 07063-01210 205-60-51430 07063-51210 KRJ3836

Short Description:

QS NO.: SY-2005

CROSS REFERENCE: 07063-01210 205-60-51430 07063-51210 KRJ3836

DONALDSON: P551210

FLEETGUARD: HF6319 HF7953 HF28978 HF28909

ENGINE: E200B EX200-1/2, PC240/PC150/PC65, PC360-3/PC300-3/PC400-3 PC210-6/PC230-6/PC250-6/PC750-6/

VEHICLE: SH200 SH200-2 SH300-5 SH240-5

LARGEST OD: 150(MM)

OVERALL HEIGHT: 450(MM)

INTRNAL DIAMETER: 110


Product Detail

Product Tags

Function of hydraulic filters

There are many ways to collect contaminants in fluids. An appliance made of filter materials to capture contaminants is called a filter. Magnetic materials are used to adsorb magnetic contaminants called magnetic filters. In addition, there are electrostatic filters, separate filters, etc. In the hydraulic system, all the contaminant particles collected in the fluid are called hydraulic filters. The most widely used hydraulic filters are in addition to the use of porous materials or winding-type slits to intercept pollutants, as well as magnetic filters and electrostatic filters used in hydraulic systems.
After the above-mentioned impurities are mixed into the hydraulic oil, with the circulation of the hydraulic oil, they will cause damage everywhere, which will seriously affect the normal operation of the hydraulic system. Flow small holes and gaps are stuck or blocked; damage the oil film between the relative moving parts, scratch the surface of the gap, increase internal leakage, reduce efficiency, increase heat generation, aggravate the chemical action of the oil, and make the oil deteriorate. According to production statistics, more than 75% of the faults in the hydraulic system are caused by impurities mixed in the hydraulic oil. Therefore, maintaining the cleanliness of the oil and preventing the contamination of the oil are very important for the hydraulic system.
The general hydraulic filter is mainly composed of a filter element (or filter screen) and a shell (or skeleton). Numerous tiny gaps or pores on the filter element constitute the flow area of ​​the oil. Therefore, when the size of the impurities mixed in the oil is larger than these tiny gaps or pores, they will be blocked and filtered out of the oil. Because different hydraulic systems have different requirements, it is impossible to completely filter the impurities mixed into the oil, and sometimes it is not necessary to be demanding.

Product description

QS NO. SY-2005
CROSSREFERENCE 07063-01210 205-60-51430 07063-51210 KRJ3836
DONALDSON P551210
FLEETGUARD HF6319HF7953 HF28978 HF28909
ENGINE E200B EX200-1/2, PC240/PC150/PC65, PC360-3/PC300-3/PC400-3 PC210-6/PC230-6/PC250-6/PC750-6/
VEHICLE SH200 SH200-2 SH300-5 SH240-5
LARGEST OD 150(MM)
OVERALL HEIGHT 450(MM)
INTRNAL DIAMETER 110

Our Workshop

workshop
workshop

Packing & Delivery

Packing
Packing

Our Exhibition

workshop

Our service

workshop

  • Previous:
  • Next:

  • Write your message here and send it to us